How to Solve Reboot and Select Proper Boot Device Error in Windows

0
616
reboot and select proper boot device

Are you facing Reboot and select proper boot device error while starting your Windows PC or laptop? If yes, then you just have come to the right place. Windows is an widely used operating system worldwide. There are millions of users who use Windows as their OS on their laptop or PC. However, sometimes, users get the select boot device error while starting their Windows PC. So, if you are facing the same issue, you can just follow the below steps to solve it. Below, we have described how you can fix this issue easily if you face it.

This issue can occur anytime, even with running Windows PC or laptop. It is one of the most common issues that Windows users face. However, if you know the solutions that we have described below, you can just follow them and solve it easily. There could be several reasons why you face the Reboot and select proper boot device error on the screen of your PC or laptop. We have described some of the reasons why you face this issue. So, you can read this post completely to know about this error. It’s a common error, and you can solve it by just following the below steps.

What is Reboot and Select Proper Boot Device Error?

reboot and select proper boot device

Before getting into the solutions to fix the issue, you should know about the problem first. It is an error that Windows users face while starting their PC or laptop. Usually, you get this error on a black screen of your Windows PC. The error says that it can’t find the boot device that it needs to boot your Windows PC. It could be a hardware, or the software BIOS error of your motherboard. In both cases, you can fix the error without any issues.

You start your computer or laptop, and after the BIOS screen, you get this error message. It could also say that you need to press any key to restart your Windows PC. You press key and it restarts. However, even after restarting you can get the same error message. So, this could be a really annoying issue as without the proper boot device, Windows can’t be run on your PC or Laptop. This issue could be temporary or permanent. However, you can try out some methods to fix the reboot and select proper boot device error on your Windows PC. Below, we have described the methods to fix it. So, just follow the methods correctly, and you’ll be able to do that without any issues.

Why You get Reboot and Select Proper Boot Device Error in Windows?

Well, there could be several reasons why you face this problem on your Windows PC or laptop. Below, we have described some reasons why you can face it. So, just read the methods if you want to know why you face this issue on your Windows PC or laptop. As there could be various reasons, there are different solutions are available as well.

HDD/SSD Issue

The most common reasons why you face this error in your Windows PC is because of your hard drive or SSD. As we all know, Windows OS gets installed in the HDD or SSD of your PC or laptop. So, if the HDD or SSD gets corrupt, then it won’t detect the drive. And your BIOS won’t find any boot drive to start your operating system. Most of the times, users face this error because of their hard drive. Sometimes, the connecting cable from your motherboard to the drive can also create problems. So, this issue could be because of that.

Boot Order

Motherboards, that supports Windows OS provides the option to change and rearrange the boot order of your Windows PC or laptop. So, you can choose if you want to give your HDD/SSD, Disk drive, Ethernet the first priority to run first when it starts your PC or laptop. So, if for some reasons, if the boot order of your Windows PC or laptop is not selected properly, then you can face this issue. Because of the boot order you can face reboot and select proper boot device error on your Windows PC or laptop.

Partition Issue

This is another reason why you can face this problem. If the partition table of your Windows PC or laptop is not active, then you can face this error. Partition table plays a vital role starting your operating system. So, if the operating system couldn’t find or support the right partition table, then it can show an error like this. Also, if you have purchased a new HDD or SSD and haven’t installed fresh Windows OS in it, then you can face this error. So, the partition table of your HDD or SSD can create problem while starting your Windows OS.

How to Fix Reboot and Select Proper Boot Device Error in Windows PC?

There are several methods that you can follow to fix this issue on your Windows PC or laptop. As it could be a problem from your hardware or software of your PC, you have to try different method to fix the issue. Below, we have described some of the working methods and tips that you can follow to fix reboot and select a proper boot device error on your Windows OS. So, just follow the methods one by one and see which one is working for you.

1. Reboot your PC

Before trying anything, the first thing that you should do to fix the issue is to restart your PC. Not with the keyboard keys, but turn it completely off. Just unplug the power cable or switch off the power connection from your electricity board and then turn it on again. Now, turn on your Windows PC or laptop with the dedicated power button and see if it’s still showing the issue. If the problem is not solved, just follow the working methods below that we have described to solve the issue completely.

2. Check If it’s Detecting Your HDD/SSD

The next thing that you have to do is to check if the motherboard of your Windows PC or laptop is detecting your HDD or SSD. To check that, there are two different methods. If the motherboard of your Windows PC is not detecting your drive, then you can face the reboot and select proper boot device issue while turning on. So, before following any other methods to fix the issue, just check if the motherboard is detecting the drive or not. You can just follow the below steps to do that.

To check if it’s detecting your HDD or SSD, you can either go to the BIOS settings menu of your PC, or you can get the information from the Boot Menu option. To get it from the BIOS Menu, you have to go to the BIOS settings. When you start your PC or laptop, hold the DEL or F2 key of your Keyboard. The BIOS settings key varies from motherboard to motherboard. Now, when it opens the BIOS settings option, go to the Boot section and there, it’ll show the boot devices. If you don’t found your HDD or SSD in the boot section of BIOS, that means, it’s not detecting the boot device. You can also press F8 or F10 to open the Boot Menu and check if your HDD or SSD is there or not.

3. Inspect HDD/SSD Connecting Cable

reboot and select proper boot device

Now, this could be a technical method to fix reboot and select proper boot device error on your Windows PC. You have to open the side panel of your PC case, or open the HDD or SSD tray of your laptop and check if the connecting cable is working or not. If the connecting cable, that connects the motherboard and the drive is damaged, then you have to replace it. You can also try reconnecting the cable from both side and the check if it’s turning on or not.

4. Rearrange Boot Order

Here is another working fix that you can try yourself to fix the issue. Sometimes, the boot order can create issues when you plug or unplug your HDD or SSD of your PC. So, you can check the boot order of your PC, and the rearrange it to fix the issue. You can do it from the BIOS settings of your motherboard. You have to go to the BIOS settings, and select the HDD or SSD as the first boot order to fix the issue. It doesn’t require to open the cabinet panel of your Windows. However, you can only select the boot order if the motherboard is detecting your Hard Drive or SSD. To rearrange the boot drive, you can just follow the below steps.

  1. Press F2 or DEL key while starting your PC.
  2. It’ll open the BIOS Menu. Go to the Boot option.
  3. There, you’ll find the boot orders. Now, using the key of keyboard, place your HDD or SSD to the first boot order.
  4. Press F8 and save the settings.
  5. Restart your PC and then see if it’s still showing the error or not.

That’s it. You can just follow the above steps to fix the boot order. Even after rearranging the boot order, it still shows the error, follow other steps that we have described below.

5. Set BIOS Settings to Default

reboot and select proper boot device

Setting the BIOS settings of your Windows PC or laptop to default can fix Reboot and Select proper boot device error. So, you should try this method out and fix the issue easily. There are easy steps that you can follow to set the BIOS setting as default. You can do that from the BIOS menu of your Windows PC or laptop. It is a working method that you can follow to fix the issue. So, just follow the below steps to set BIOS settings as default on your Windows PC or laptop and then see if it solves the problem.

  1. First of all, go to the BIOS settings of your PC by pressing F2, F8 or DEL key, according to the motherboard that you are using.
  2. From the BIOS setting, you can press the F9 key (In some motherboards) or you can navigate to the BIOS reset option, reset it and restart your Windows PC.

That’s it. Now, check if it’s detecting your HDD or SSD or not.

6. Reinstall Windows OS

If you are facing this issue because of the partition table or operating system, then it’s better to reinstall the Windows OS of your PC to fix the issue. You can use other PC or laptop to make a USB bootable device of genuine version of Windows OS and then install it on your PC or laptop. You can get it from the official Windows website. While installing Windows OS, just delete the partitions of your HDD/SSD and create new portions. It’ll delete all your data from your drive. So, if you don’t want to do that, just delete the C:// drive and install Windows OS in it.

7. Replace HDD/SSD

Last, but not the least thing that you can do to fix reboot and select proper boot device error on your Windows PC is, you can replace or repair your HDD or SSD that you are using. Drives can get corrupted or stop working over time. So, you have to check it with an extra HDD or SSD on your Windows PC or laptop. Just replace the drive and see if it’s starting Windows OS. This is the ultimate fix that you can follow to fix the issue easily.

Read Also: Fix Server IP Could not Be Found in Chrome

Conclusion

So, guys, I hope you have found this guide helpful. If you liked this guide, you can share it on your social media platforms. Just use the share buttons below to share this guide. Above, we have tried to described several methods that you can follow to fix the reboot and select boot device error. So, just follow the steps correctly, and you’ll be able to solve it easily. If you have any question or queries, you can ask them in the comment section below. You can also provide your feedback in the comment section.

LEAVE A REPLY

Please enter your comment!
Please enter your name here