How to Select The Best Conveyor For Your Business

There are certain factors that are frequently unavoidable in conveyor designs, mainly when working in confined spaces or avoiding manufacturing supports and installed equipment. Numerous technologies are available on the market, each designed with a specific purpose. The most critical factors are avoiding delays and product damage, which a suitable conveyor will prevent.

When selecting the suitable Flex-Turn Conveyor, you would help if you considered the product being handled, the assembly environment, the degree of sanitation, and your throughput objectives. The conveyor selection guide is a great place to start with that in mind. Your priorities will assist the guide in limiting your alternatives. When weighing your options, keep these three things in mind.

1.Material

The entire material definition consists of several crucial elements. It is essential to comprehend each as a whole. It is always preferable to examine them collectively because some of these are dynamic and can affect – or be affected by – one or more of the other qualities.

A prevalent misperception concerning materials and their diverse handling attributes is that information can be acquired from Material Safety Data Sheets (MSDS). This isn’t usually the case, though. As its name suggests, the document declares any health, safety, or environmental problems. Although it may provide some hazy indications, it rarely provides enough information to predict how a material is likely to behave when handled, stored, or processed.

2.The purpose

The function and performance requirements a conveyor must meet are operation requirements. There should be some clarification and specificity in a few areas of the operation. Material movement in a process can be broadly classified into feeding and conveying. For processors to choose a suitable conveyor, it is critical that they comprehend the differences.

Moving an item from one or more pickup sites to one or more drop points is the definition of conveying. While delivery time is significant, it usually falls between a minimum and maximum range. The rate at which this is completed is typically set. The most common purpose of the stainless steel conveyor belt is to serve as a replenishment mechanism for feeders, surge hoppers, and process equipment.

Regarding how much material is delivered, feeding is typically far more time-sensitive and process-critical. Usually, material is supplied to a single drop point and received from a single source. Delivery rates are typically variable due to the accuracy with which material must be provided; they can either slow down to approach a batch-complete setpoint or precisely coincide with a continuously varying demand.

3.Environment

The right equipment selection requires careful consideration of several environmental parameters. Certain combinations of these attributes may lead to handling issues or make them worse, while other combinations might call for further precautions to ensure health and safety.

Among the environmental elements are:

• Sources of ignition that are open
• The possibility of an explosive or flammable environment
• Corrosive vapours
• High humidity
• Temperature
• Vibration
• Pressure or vacuum

4.Price

The impact of costs on a project’s viability cannot be overstated. It makes sense that each company has a separate reasoning formula. While some businesses place more weight on the initial investment, others prioritise the long-term cost of ownership in their justification calculations, emphasising reliability, lower energy consumption, and upkeep. In order to ascertain whether a suggested conveyance solution is financially feasible, it is in the customer’s best interest to speak with potential suppliers as soon as possible about the cost of various solutions. Having part of this conversation upfront can save valuable time and energy, given how lean some businesses operate and how busy everyone is.

In summary

A conveyor’s appropriate choice and sizing are essential to fulfilling production targets in batch or continuous processing applications. It can be overwhelming to think about all the critical aspects to take into account when selecting a conveyor. To choose the best-conveying technology for your unique needs and to get the most return on your investment, take the time to fully comprehend these factors and collect as much accurate data as you can about each component. Ideally, you can collaborate with a reliable, experienced supplier.

Experience seamless integration and unmatched performance with Wire Belt‘s industry-leading conveyor systems. Visit the website today to discover the wide range of conveyors for the future of manufacturing.